GREASE SEPARATORS (TRAPS)

Grease separators (traps) are designed to separate grease from wastewater and are used in public catering facilities such as cafes, restaurants, canteens, etc. The grease traps we offer are compact and have no moving parts. Simple and reliable construction ensures efficient operation of fat trap and maintenance is limited to suction of the accumulated layer of grease.

THE PRINCIPLE OF OPERATION OF THE GREASLY GREASE TRAP

Greasly grease (fat) separators have been designed according to requirements of standard EN 1825 therefore the residual grease content in the treated wastewater does not exceed 25 mg/l. The branch pipe system installed in the grease separator reservoir ensures optimum grease separation. The plant has three zones: deposition, grease separation and grease storage. In the first zone (1) there is an automatic deposition of heavy insoluble particles of contaminants. At a higher level, in the grease separation zone (2) the fat droplets become larger and rise to the surface of the water, forming a layer of fat (grease). This layer is deposited in the fat accumulation zone (3), which ensures that the concentrated layer of fat would not enter the outlet. Treated water enters the outlet through the outlet installed on the bottom.

1
2
3
horizontali riebalų gaudyklė
1
2
3
vertikali riebalų gaudyklė

Papildoma įranga

Grease (Fat) level alarm

GREASLY grease trap can be equipped with automatic grease level alarm LS-2 for convenience of the client, which will alert you about the maximum grease accumulation level and demand for service of the plant. The alarm can also control pumps or valves.

Grease extraction pipe and nozzle

Special construction grease trap in the reservoir is additionally equipped with two components – the pipe for the suction of the content of the trap and the nozzle for washing the walls of the trap reservoir. The trap is emptied and washed by connecting the pipes to the suction and washer equipment without opening the cover, so that unpleasant odours do not spread to the environment. This is relevant when a grease trap is installed in the kitchen or other enclosed space.

MATERIALS AND CERTIFICATES

Housing of grease separator (trap) GREASLY is made of polyethylene by the most modern rotational casting method. This automated method of shaping of plastic products allows avoiding the manufacturing defect due to the human factor and also ensures constant product dimensions. Polyethylene used in the manufacture of containers can be recycled and reused, thus reducing quantity of waste and protecting the environment. Grease traps GREASLY ensure that the residual fat content of the discharged wastewater does not exceed 25 mg/l. The airtightness of the traps and their resistance to mechanical loads have been tested and comply with current standards of the European Union.